|
|
| |
| |
|
|
| |
|
|
|
All towel rails are constructed from 100% stainless steel including the brackets. The towel rail can be cleaned using any available stainless steel cleaning product, and polished with a soft cloth. Small scratches and marks can be removed using metal polishes.
|
|
|
|
|
|
These allow you to heat your centrally heated towel radiator electrically when the heating is turned off. Dual fuel kits comprise of an electric element and a chrome plated T piece which allows an element and central heating valve to be connected to the same side of the towel radiator. All towel radiators have been designed to allow an element to be inserted on the right hand side of the radiator, although a left hand option is available on request.
|
|
|
| |
|
|
Centre pipe dimensions are as illustrated on the table below.
All Models are constructed from 100% stainless steel thus are suitable for any plumbing system including open/hot water systems.
All rails/radiators are pressure tested to 12 bar at two separate stages during production.
All rails/radiators have been fitted with half inch BSP female tapings.
BTU/Watt output figures quoted on all our products are based on ΔT=60K. Please consult a plumber or a heating engineer to accurately calculate the output needed for your project.
Important! We cannot offer our guarantee on open/hot water system use when a salt based water softener is being used.
We recommend that all plumbing work is carried out by a qualified plumber.
|
|
|
|
|
All elements used in our electric radiators and dual fuel kits are heat controlled using the latest thermal technology. Elements are fitted as standard in the right hand side of the radiator and in the case of electric only, capped on the left with a chrome plated cap. Left hand option available on special request.
Please allow and extra 90mm at the bottom of your radiator for the element.
All elements need to be wired to a 5 amp fuse.
All elements are rated IP55.
Electric elements are guaranteed for one year.
Important! Elements must be installed at the bottom of your radiator. Please never dry test an element, they must be immersed in water at all times. Doing so would invalidate the guarantee.
It is now law that all electrical work carried out in the bathroom by a qualified electrician in accordance with I.E.E. wiring regulations.
|
|
|
| |
|
|
25 year guarantee against manufacturing defects for all towel rails and radiators, proof of purchase is required for a replacement unit, guarantee does not extend to fitting costs and delivery charges.
Electric elements have a one year guarantee.
Please note we cannot offer our guarantee on open/hot water system use when a salt based water softener is being used.
|
|
|
|
|
|
|
|
